Description
Key Features of the 1500V 60A MC4 Connector
1. Photovoltaic DC Connection
The 1500V 60A MC4 Photovoltaic Connector is intended for compatible solar PV cable connection applications. It provides a connector interface for photovoltaic equipment where the required voltage and current ratings match the product specifications.
Before installation, confirm the rated voltage, rated current and applicable cable sizes for the exact model.
2. Insulated Connector Housing
The connector housing provides electrical insulation and mechanical support for the connection components. Its construction is intended to separate conductive contacts from surrounding components during normal operation.
Housing material and environmental performance should be verified against the manufacturer’s specifications for this particular model.
3. Conductive Contacts and Cable Termination
The connector uses contact components to establish an electrical connection between compatible photovoltaic cables.
Correct conductor preparation, contact selection and termination are important for achieving a reliable connection. The approved cable cross-section and contact assembly method should follow the specifications for the selected connector.
4. Connector Sealing and Locking Structure
The connector assembly is designed to provide a mating interface for compatible connector halves. Sealing components and locking features, where specified for the model, support proper assembly and connection retention.
The applicable protection rating must be confirmed using the product’s technical documentation. Do not assume that ratings from other MC4 connector models apply to this version.
5. Installation for Compatible PV Systems
The connector can be considered for photovoltaic cable assemblies when its electrical ratings, mating interfaces and cable requirements are compatible with the intended system.
Installers should follow the manufacturer’s assembly instructions and applicable electrical safety requirements. Photovoltaic connectors must not be disconnected under load unless specifically rated for that operation.
Product Description
| Parameter | Specification |
|---|---|
| Product Name | 1500V 60A MC4 Photovoltaic Connector |
| Rated Voltage | 1500V DC |
| Rated Current | 60A |
| Protection Rating | IP67 |
| Contact Resistance | ≤0.5 mΩ |
| Insulation Resistance | ≥1000 MΩ |
| Housing Material | PPO / PA |
| Contact Material | Copper |
| Flammability Rating | UL94 V-0 |
| Cable Cross-Section | 4 / 6 mm² |
| Operating Temperature | -40°C to +85°C |
| Termination Method | Crimp Type |
| Locking Mechanism | Snap-Lock |
| Connector Configuration | Male / Female |
MC4 Connector Structure and Installation
The 1500V 60A MC4 Photovoltaic Connector is designed for compatible photovoltaic cable connection applications.
Reliable performance depends on selecting the correct connector configuration, conductor size and mating components. Cable preparation and contact termination must follow the manufacturer’s installation requirements.
Before integrating the connector into a PV system, verify the model-specific electrical ratings, protection rating and connector compatibility against the applicable technical documentation.
Applications of the 1500V 60A MC4 Connector
Photovoltaic DC Cable Assemblies
Provides a connector option for suitably designed PV cable assemblies requiring a 1500V DC and 60A connection component.
Solar Combiner Box Connections
Can be considered for compatible DC collection and combiner box wiring where the connector’s electrical and mechanical requirements are satisfied.
Solar Inverter Equipment
May be selected for appropriately rated photovoltaic cable connections associated with inverter DC input equipment.
Commercial and Industrial Solar Projects
The 1500V voltage class and stated 60A rating allow system designers to evaluate this connector for suitable solar power applications.
Why Choose Our 1500V 60A MC4 Connector?
The 1500V 60A MC4 Connector expands SOLKV’s photovoltaic connector range with a higher-current option for compatible solar DC power systems.
For solar equipment manufacturers, electrical distributors, PV installers and EPC contractors, selecting the correct connector requires accurate information about voltage, current, conductor compatibility and installation conditions.
SOLKV offers MC4 photovoltaic connector configurations covering different electrical ratings and connection requirements. Buyers can request model-specific specifications to verify suitability for their project.
FAQ
What are the rated voltage and current of this connector?
The 1500V 60A MC4 Connector is identified with a rated voltage of 1500V DC and a rated current of 60A.
What cable sizes are compatible with the 60A connector?
The compatible conductor sizes have not been confirmed in the supplied documentation. Please request the specific 60A contact and cable specifications before installation.
Is the 60A connector rated IP67?
The manufacturer's general MC4 connector documentation lists IP67 protection, but its applicability to the 60A configuration has not yet been verified.
Can this connector be used in solar combiner boxes?
It may be used in compatible photovoltaic DC connection arrangements when its electrical ratings, contact configuration and installation requirements meet the equipment specifications.
Can the connector be mated with MC4 connectors from other manufacturers?
Only connector halves with verified electrical and mechanical mating compatibility should be connected. Similar appearance does not guarantee compatibility.
Request Quote
Tell us your specifications, quantity, or application scenario and we will reply with a tailored quote.
